Lu's Pool and Spa Directions 636 271 7727  
Pool SuppliesSpaceBarPoolsSpaceBarSpa SuppliesSpaceBarhot tubsSpaceBarServicesSpaceBarContact Us
Topper
 
Top
PristineBlue
(Pool & Spa)
PristineBlue
Water treated with PristineBlue® feelssofter and looks inviting without a chemical taste or odor.
Learn More


Natural ChemestryNatrural Chemistry
(Pool and Spa)

We are constantly developing thoughtful, sensible solutions that focus both on the environment.
Learn More

GLB POOL and SPAGLB Pool & Spa
Since 1956, GLBâ„¢ has been on the cutting edge of product development for swimming pool water care.
Learn More
 

Pristine Blue For your SpaPristineBlue For Your Pool & Spa
Lu's Pool and Spa carries a diverse libe of products from PristineBlue. PristineBlue® is a non-chlorine chemical system which provides pool owners with many advantages over chlorine. It’s gentle on eyes and skin, won’t bleach vinyl liners and your family can swim immediately after application.

If you don't see your product here, please ask we can order it for you.
Rule

Pristine BluePristineBlue® is a non-chlorine chemical system which provides pool, spa or swim spa owners with many advantages over chlorine. It’s gentle on eyes and skin, won’t bleach vinyl liners and your family can swim immediately after application. PristineBlue® is used to control algae and nonpublic health bacteria, and bacteria that cause odor problems in residential swimming pools, spas and hot tubs. PristineBlue® is environmentally friendly, EPA registered as an algicide/bactericide*and Certified for addition to drinking water by NSF International.

Application rate:
For pools add 2 ounces per 1,000 gallons. For spas add 6 milliliters per 100 gallons. Test the PristineBlue® level every 2 weeks with the PristineBlue® Mini Test Kit and “top off” according to the chart in the Pool & Spa Care Guide


Pristine CheckPristineCheck® is a water prep that gets your pool, spa or swim spa ready for the introduction of PristineBlue®. It’s essential to backwash or clean the filter after the use of PristineCheck®. If your source water is high in calcium, we recommend an application of PristineCheck® whenever you add makeup water to the pool, spa or swim spa.

Application rate:
For pools add 2 ounces per 1,000 gallons. Filter for 24 hours; then backwash the filter or remove and clean the cartridge.

Application rate:
For spas add 10 milliliters per 100 gallons. Filter for 4 to 6 hours; then remove and clean the filter media.


Pristine Clean

PristineClean® ensures sparkling clean surfaces in your pool, spa or swim spa by inhibiting scale formation and stains caused by metals in the water. It prevents the metal and mineral particles that enter your pool, spa or swim spa through hoses, jewelry and metal equipment from bonding to walls and other surfaces. PristineClean® is added every 2 weeks along with PristineBlue®. PristineClean® may also be used to remove existing metal stains on surfaces.

Application rate:
For pools add 2 ounces per 10,000 gallons every 2 weeks. For spas add 1 milliliter per 100 gallons every 2 weeks.


Pristine ClearPristineClear® clears cloudy water in pools, spas and swim spas bringing suspended particles together enabling the filtration system to better remove the particles. PristineClear® is suitable for all pH levels.

Application rate:
For pools add 2 ounces per 10,000 gallons every 2 weeks. Filter for 24 hours and then backwash the filter or remove and clean the cartridge.

Application rate:
For spas add 1 milliliter per 100 gallons. Filter for 4 to 6 hours and then remove and clean the filter media.


Pristine PowerPristinePower® is a ph buffered "shock" and non-chlorine oxidizer. It dissolves quickly and removes odors and organic materials, contaminants and body oils that otherwise build up and cause cloudy or dull water. Weekly or biweekly shocking is recommended for pools. In spas we recommend a dose of PristinePower® after each use of the spa, not to exceed once per day. Unlike chlorine shocks, it is safe for swimmers to enter the water after 15 minutes!

Application rate:
For pools add 1 pound per 10,000 gallons, weekly or every 2 weeks. For spas add 5 milliliters (or 1 teaspoon) per 100 gallons after each use of the spa, not to exceed once per day.


Pristine ExtraPristineExtra® is a 99% sodium di-chlor shock that is used in the start up of PristineBlue®. It dissipates rapidly, therefore rendering the water back to a non-chlorine status. PristineExtra® may be used for troubleshooting.

Application rate:
For pools add 1 pound per 10,000 gallons at start up. For spas add 5 milliliters (or 1 teaspoon) per 100 gallons at start up.


Pristine DownPristinepHDown™ contains sodium bisulfate. This product decreases the pH and total alkalinity of pool, spa or swim spa water. Pristine UpPristinepHUp™ contains sodium carbonate. This product increases the pH of pool, spa or swim spa water.

Pristine AlkUpPristineAlkUp™ contains sodium bicarbonate. This product increases the total alkalinity of pool, spa or swim spa water.

Pristine MistPristineMist™ prevents and eliminates odor and discoloration to the underside of the spa cover.

Application rate:
Spray the spa cover every 4 to 6 weeks.


Pristine StripsPristineStrips™ allow you to monitor your pool, spa or swim spa's total alkalinity and pH. PristineBlue Test KitPristineBlue® Mini Test Kit measures the PristineBlue® level in your water so you can calculate your “top off” dose. Accurate liquid reagents minimize the guesswork

PristineBlue Starter KitThe PristineBlue® Spa Kit contains 6 of the components of the PristineBlue® system.

Contains:
1-8 ounce container of PristineBlue®
1-8 ounce container of PristineCheck®
1-8 ounce container of PristineClean®
1-8 ounce container of PristineClear®
1-8 ounce container of PristineExtra®
1-10 ounce container of PristinePower®
1-Spa measuring cup
1-Spa Care Guide

Small Pool Start Up KitThe Small Pool Start Up Kit contains the products needed to get your chlorine pool started on PristineBlue®. It is for pools up to 16,000 gallons.

Contains:
1-32 ounce container of PristineCheck®
1-32 ounce container of PristineBlue®
2-1 pound bags of PristineExtra®
1-Pool measuring cup
1-PristineBlue® Pool & Spa Care Guide


Large Pool Start UpThe Large Pool Start Up Kit contains the products you need to get your chlorine pool started on PristineBlue®. It is for pools up to 32,000 gallons.

Contains:
1-64 ounce container of PristineCheck®
1-64 ounce container of PristineBlue®
1-4 pound container of PristineExtra®
1-PristineBlue® Pool & Spa Care Guide


Not listed here? We can Order it.
Top
 
  636-271-7727
120 E. Osage St., Pacific, MO 63069 p: 636-271-7727 • f: 636-451-7762
Summer Hours: Monday - Friday, 10-6 • Saturday, 10-3 • Sunday, Closed
© 2014 LU’S POOL & SPA, All Rights Reserved.